Call +001 555 801

Add a wing to your dream



Be the first to review this product



Flame Wheel Arf Kit + Remote JR XG8 8 + Landing Gear F550 + NAZA-M-V2 + iMAX B6-AC Charger + 4s 5200mAh 25C Lipo Battery

  1. Ultrastrength Material 

  2. Integrated PCB Wiring 

  3. Huge Assembly Space 

  4. Attractive Frame Arms

  5. A Total Solution For Hobbyists

Availability: In stock

Only 9 left

Regular Price: AED 5,320.00

Special Price AED 3,990.00

Regular Price: AED 5,320.00

Special Price AED 3,990.00


Our Services

  • Delivery
    in 48 Hours
  • Cash On
  • Tel : +971 4 3357 899
    Mob : +971 56 8385198



FLAME WHEEL is a multi-rotor designed for all pilots for fun or AP. With DJI WooKong-M or Naza-M autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be applied for entertainment, aerial photography, FPV and other aero-modeling activities.

Ultrastrength Material
Frame Arms adopt PA66+30GF ultrastrength material design, provide better crashworthiness.

Integrated PCB Wiring
Using high strength compound PCB frame board, which makes wiring of ESCs and battery more safe and easier.

Huge Assemble Space
Optimized frame design, which provides abundant assemble space for autopilot systems.

Gorgeous Frame Arms
Provide different color frame arms: red, white, black, which makes your flight more colorful.


Frame Weight 478g
Diagonal Wheelbase 550mm
Takeoff Weight 1200g ~ 2400g
Recommended Propeller 10 × 3.8in ; 8 × 4.5in
Recommended Battery 3S~4S LiPo
Recommended Motor 22 × 12mm (Stator size)
Recommended ESC 30A OPTO

The XG8  is the first JR transmitter to come with a 2S Li-Fe battery, being fitted with a 1400 mAh pack. This has greatly reduced the weight of the transmitter, which weighs in at only 770 grams. It also ensures perfect balance. The transmitter has an integrated charging circuit so just plug in the AC adapter supplied and the charging unit will shut down automatically once it detects that the battery is fully charged. No more worries overcharging! The XG8 offers Aeroplane, Helicopter and Glider modes, a 30 model internal memory, stick modes 1 to 4 and an SD card slot for model data sharing, expanded storage and software updates (SD card not supplied).

The XG8 offers Aeroplane, Helicopter and Glider modes, a 30 model internal memory, stick modes 1 to 4 and an SD card slot for model data sharing, expanded storage and software updates (SD card not supplied).

Programming is easy thanks to JR's well-proven, intuitive user interface with data entered using the familiar scroll bar and four push-button entry keys. The programming information is clearly displayed on the large, graphical back lit screen.

XG8 uses the new JR DMSS 2.4 technology which, besides offering a secure, robust radio link to control your models, also offers advanced telemetry functions and JR's new Intelligent Output System. Receiver voltage telemetry is built in as standard and other forthcoming add-on sensors will give you real time feedback of information from your model such as the RPM of an aircraft propeller or helicopter rotor blades, temperature and variometer/altimeter readings.

JR's Intelligent Output System automatically selects control signals that need to be transmitted at exactly the same time and transmits the data for these channels as one complete signal frame. This ensures that there is no time delay when commanding servos used for critical functions such as a CCPM swash plate on a helicopter or when operating a four servo aileron wing.

Other features include side-lever controls on either side of the transmitter, a Touch Select System for switch selection, dual trim options, a user selected menu for frequently used functions, failsafe on all eight channels, user assigned switch function, programmable throttle cut and two independent programmable timers.  

Helicopter Functions

Six flight modes with programmable delay.
Adjustable electronic E-ring system prevents overdriving of the cyclic servos.
Five swash plate types.
Five-point graphical tail curve.
Five-point graphical throttle and pitch curves with safety system.
Advanced trim input system; allows in-flight adjustment of gyro gain and governor.
Throttle and Pitch Curve settings can be copied between flight modes.
JR Easy Swash Plate Correction' system. 

Aeroplane Functions

Three flight modes with programmable delay.
Three-position flap switch with flap delay and elevator compensation programming.
Various wing types, including:
- Normal: Dual servo selection on AIL/ELEV/RUDD/FLAP
- Flaperon: Dual servo selection on ELEV/RUDD
- Delta: Dual servo selection on RUDD/FLAP
- Four Aileron: Dual servo selection on ELEV or RUDD
V-Tail setting.
Advanced Trim Input System: allows in-flight mixing adjustment for manoeuvres such as knife-edge flight or landing with flap. 

Glider Functions

Five flight modes with programmable delay.
Advanced programmable brake system with elevator compensation programming.
Various wing types, including:
- Flaperon: Dual servo selection on ELEV/FLAP/SPOI
V-Tail setting.
Advanced Trim Input System: allows in-flight mixing adjustment. 


A durable and useful set of landing gear that mounts easily to the underside of the DJI 550 bottom plate. Legs and crossmembers are 1/16" FR4 fiberglas epoxy; top connecting straps from 3/32" FR4. New photos will soon reveal a notch in the landing gear for more secure placement of batteries or accessories, similar to what we have on our AV130 Landing Gear. Crossmembers are machined with interlocking tabs that accept a M3 nut and screw. 12 inch Velcro cinching straps are included. They pass through slots in the crossmembers so they do not fall off when you loosen them. Skids are 12 inches long, spaced 12 inches apart, and are made of thick walled carbon tubes with rubber grommets and vinyl end caps. Easy to assemble. Includes two 12 inch Velcro cinching straps for batteries or accessories.   Materials manufactured and machined in the USA. 170 grams. Also available as a carbon fiber version, which is 130 grams.


Naza is a light weight multi-axis control platform, specially designed for multi-rotor model hobbyists. Different from WooKong-M for heavy payloads and aero photography, Naza not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists a wonderful flight experience. 

Basic Performance

Supported Multi-Rotor Quad-rotor I4, X4 Hex-rotor I6, X6, IY6, Y6 Octo-rotor I8,V8,X8
Supported ESC Output 400Hz refresh frequency
Recommended Transmitter PCM or 2.4GHz with minimum 4 channels
Working Voltage Range MC:4.8V~5.5V VU Input: 7.4V ~ 26.0 V (recommend 2S ~ 6S LiPo) Output(V-SEN port red wire): 3A@5V (burst current:7.5A)
Power Consumption MAX: 1.5W(0.3A@5V) Normal:0.6W(0.12A@5V)
Operating Temperature -10°C ~ 50°C
Assistant Software System Requirement Windows XP sp3 / Windows 7 / Windows 8

Flight Performance

Hovering Accuracy(GPS Mode)  Vertical:±0.8m Horizontal:±2.5m
Max Yaw Angular Velocity  200°/s
Max Tilt Angle  35°
Ascent / Descent  6m/s,4.5m/s





MC: 45.5mm x 32.5mm x 18.5mm
PMU: 39.5mm x 27.5mm x 10.0mm
GPS & Compass 46mm(diameter)x10mm
LED: 25mm x 25mm x 7.0mm

Built-In Functions

Multiple Autopilot Control Mode
Enhanced Fail-safe
Low Voltage Protection
S-Bus Receiver Support
PPM Receiver Support
Independent PMU Module


This item is for a rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for lipo battery. Battery that can be charged by this charger,Lipo / Li-ion / LiFe / NiMh / NiCad / Pb / Lead Acid   Feature:

1. High-power and high-performance circuit
2. Microprocessor controlled
3. Maximen safety: Delta-peak sensitivity, Capacity limit, processing time limit, tempreture limit, input power monitor
4. Monitoring the voltage of individual cell
5. Can charge Li-ion / LiPo / LiFe 1-6 cells, and Ni-Cd / NiMH 1 -15 cells
6. Dual Power, built-in AC adapter
7. UndefinedLarge range of charge currents
8. Store function, allows safe storage current, and data storage (Store up to 5 packs in memory)
9. Battery break in and cycling
10. Built-in temperature sensor
11. Separate voltage detector for balance charge mode



1. Adopted the world's key material-LiCo02.
2. Used fully automatic lamination machine with Nano Tech.
3. Laminated structure, Nano Coat Technology. Advanced Nano ultrasonic welding electrode.
4. Industry most stringent single cell capacity, voltage, resistance and discharge curve (competition level) matching process.
5. Safety performance is strong and self-discharge is extremely low.
6. No memory effect, high discharge and charge current. 
7. High energy density with quite low weight and IR.
8. Good storage performance, Green & Environmental protection without any pollution.

Additional Info

Additional Info

Country of Manufacture China


Write Your Own Review

You're reviewing: DJI ARF KIT F550 COMBO A

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars



Use spaces to separate tags. Use single quotes (') for phrases.