DJI ZENMUSE Z15-BMPCC
The DJI Zenmuse Z15-BMPCC gimbal represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°. Used with a DJI A2 professional flight controller and a professional DJI aerial system, it will keep the BMPCC stable and controllable even in strong winds or intense maneuvers.
Note: Gimbal Only
General
Built-In Functions
Three Working Modes
- · Orientation-locked control
- · Non orientation-locked control
- · FPV mode (Reset)
Built-in independent IMU module
DJI gimbal special servos drive module
HDMI-AV/HD module
Wireless video transmission supported
Camera record control supported
Wide range voltage input supported
S-Bus/PPM Receiver supported
Peripheral
Supported Camera
- BMPCC
Current Supported Lens
- OLYMPUS M.ZUIKO DIGITAL ED 12mm f/2.0
GCU Input Power
- 4S~12S LiPo (Recommend 6S if used with the S800 EVO/S1000)
Control Requirement
- Minimum of four spare receiver channels
Assistant Software System Requirement
- Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
Mechanical & Electrical Characteristics
Working Current
- Static current: 200mA (@25V)
- Dynamic current: 400mA (@25V)
- Locked-rotor current: 1.8A (@25V)
Operating Temperature
- -10°C ~ 50°C
Weight
- 1.26Kg
Dimensions
- 227mm(H) × 212mm(D) × 210mm(W)
GCU Weight
- 63g
GCU Dimensions
- 64.2 mm ×34.1mm ×19.5mm
Working Performance
Load Weight (Reference Value)
- 487g(@BMPCC with OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0, Battery and SD-Card)
Controlled Angle Accuracy
±0.01°
Maximum Controlled Rotation Speed
- Pan axis: ±130°/s
- Tilt axis: ±130°/s
- Roll axis: ±30°/s
Controlled Rotation Range
- Pan axis control: ±360° continuous rotation
- Tilt axis control: +50°/-140°
- Roll axis control: ±40
Manufacturer | dji |
---|