1 * 24VDC55A output plus
2 * 12V15A outputs, 1320W total output power Power Station switching power supply.

Perfect power source for the Cellpro PowerLab 6 and PowerLab 8 work stations or the Cellpro 10XP charger .

Features include:

1) 24V under and over-voltage protection,

2) Over current protection

3) Over temperature protection,

4) Input under voltage protection.

5) Lockout on shutdown in the event of an over current condition. A/C power must be cycled for the PS to operate after lock out.

Dimensions: 25cm L x 19cm W x 9cm T

Weight: 3.8kg.

24V/55A 12V/10A 5V/2A

AC to DC Power Supply (PS24V55A-BP-US)

Features:
 Single 24V/55A Output
 Dual 12V/10A Outputs
 5V/2A USB Charge Port
 Dual Fan Cooling
 100-240v Input

Precaution:
 When using the 24 volt output on the supply, always connect device to the output before
powering up supplies. Connecting to the 24 volt output after the supplies are powered up will
cause the supplies to shut down.
 Do not exceed 10 amps on the 12 volt outputs. Exceeding 10 amps on the 12 volt output will
cause damage to the banana jacks.
 Always make sure both fans are operating when power supplies are powered up.

Connections:
 You can connect your device by using alligator clips (remove screw terminals on supply to
make connection).
 You can connect your device to the power supply by bullet connectors or stripping and tinning
the ends of your device and attaching to the screw terminals.
 You can make a quick connection pigtail for the PL6/PL8 by using some 10AWG silicon wire,
adding an EC5 female connector with male pins and (optional) 5mm bullet connectors (PN:
EC5-M/F-1PR-US). You can add the bullet connectors to the pigtail or strip and tin the ends
and connect to the screw terminals as above.